EasyManuals Logo

Roland Octapad SPD-20X User Manual

Roland Octapad SPD-20X
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
70
Room Reverb A simulation of the reverberation in a small room.
Hall Reverb A simulation of the reverberation in a room with a high ceiling.
Plate Reverb A simulation of a plate reverb (a reverb device which uses a metal plate),
producing bright reverberation.
Chorus An eect of enhanced spaciousness.
Flanger An eect blending sounds reminiscent of a jet ascending and descending.
Delay Feedback This term refers to when the delayed signal is returned to the input of the circuit.
Delay eects marked “with feedback” will have more repetitions of the delayed
sound.
Panning Delay The delayed sound will be panned back and forth between the left and right
speakers (if you are listening in stereo). Even if you select a Panning Delay
marked “without feedback, there will be one delay for each position of right,
center, and left.
Reverb Time This sets the length of the reverberation.
Chorus Rate This sets the modulation speed of the chorus effect. Higher settings result in
faster chorusing.
Flanger Rate This sets the modulation speed of the flanger effect. Higher settings result in
faster anging.
Delay Time This sets the Delay time. Higher settings result in a longer delay. For the exact
Delay times, refer to the table below.
Explanation of Terms

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland Octapad SPD-20X and is the answer not in the manual?

Roland Octapad SPD-20X Specifications

General IconGeneral
Velocity SensitivityYes
Pads8
Presets50
EffectsEQ
DisplayLCD
MIDIMIDI
ConnectivityMIDI
OutputsStereo (L/Mono, R)
Inputs4 x External Trigger Inputs, Footswitch Jack
Power SupplyAC Adapter

Related product manuals