Why does my Roland R-26 Recording Equipment power turn off unexpectedly?
If your Roland Recording Equipment turns off unexpectedly, it could be due to the Auto Off setting; check this setting. Also, verify the end voltage setting is appropriate. If you're using batteries, they may be running low, so install fresh batteries.
What to do if my Roland R-26 can’t play back files?
If you can't play back files on your Roland Recording Equipment, consider these points: * Ensure the file name is correctly assigned; the R-26 cannot use files that begin with a period (“.”). * Make sure the file extension is either .MP3 or .WAV, as the R-26 only supports these formats. * If the file is damaged, attempt to recover it using the Repair function. * When using the unit as an audio interface, ensure the project's sampling frequency matches the audio interface's set sampling frequency.
How to fix distorted sound on my Roland Recording Equipment?
If the recorded sound from your Roland Recording Equipment is distorted, it's likely that the input level or input sensitivity is too high. Adjust the recording level appropriately to resolve this.
What to do if my Roland Recording Equipment power won’t turn on?
If your Roland Recording Equipment won’t turn on, check the following: 1. Make sure that the AC adapter is connected correctly. 2. If using batteries, ensure they are oriented correctly and fit well in the compartment. 3. If the batteries are low, replace them with fresh ones.
Why is there no sound coming from my Roland R-26 Recording Equipment?
If you're experiencing no sound with your Roland Recording Equipment, the issue might be due to the output volume being too low. Try gradually increasing the output volume. Also, verify that your headphones or speakers are correctly connected.
General| Sample rate | 96 kHz |
|---|---|
| Audio quality | 24 bit |
| XLR in | - |
| Interface | USB |
| USB 2.0 ports quantity | 1 |
| Product color | Black, Grey |
| Microphone input impedance | 3000 Ω |
Weight and Dimensions| Weight | 370 g |
|---|---|
| Dimensions (WxDxH) | 82 x 180 x 41 mm |
Covers warnings on opening, repairing, installation locations, and symbols.
Details safe handling, charging, and disposal of batteries.
Covers AC adaptor, cords, grounding, and power connection safety.
Addresses use with children, impact, liquids, and temperature extremes.
Critical warning about supplying phantom power to non-condenser mics.
Notes on AC adaptor heat, connecting devices, and auto-off function.
Guidelines for battery installation, type, and power conservation.
Advice on avoiding interference, heat, moisture, and surface marks.
Instructions for regular cleaning and avoiding solvents.
Warnings about data loss during repairs and backups.
Proper insertion, care, and protection of SD cards.
Guidelines for handling discs and respecting copyright laws.
Using internal/external mics for pianos and similar instruments.
Capturing high-volume bands and creating WAV/MP3 files simultaneously.
Pinpointing distant sounds or capturing broad soundscapes with mic directionality.
Capturing audience and venue sound using internal and external mics.
Detailed explanation of the R-26's physical controls and ports.
Explanation of the main screen, playing/stopped, and recording displays.
Overview of INFO, MON, MARK, and A-B SPEED tabs for project navigation.
Guide to accessing and navigating the R-26's menu system.
Instructions for powering the R-26 via batteries, AC adaptor, or external source.
Step-by-step guide to inserting batteries into the unit.
Procedure for connecting the AC adaptor for power.
Guidance on selecting final voltage for external power.
How to use the power/hold switch to turn the unit on and off.
Steps to set the unit's internal calendar and clock.
Procedures for managing SD cards for recording.
Instructions for safely inserting and removing SD cards.
Process for formatting an SD card for use with the R-26.
How to connect audio output devices for monitoring.
Step-by-step diagram outlining the recording process.
Configuring recording mode, source, sample rate, and format.
Choosing channel count and input sources for recording.
Selecting appropriate audio quality and file format.
Configuring pre-recording capture and project naming.
Deciding between date-based or sequential project naming.
Automating recording start and selecting WAV/BWF file types.
Configuring input sources like internal mics, analog, and plug-in mics.
Adjusting limiter and low-cut filter for internal microphones.
Configuring analog inputs, including type, phantom power, and filters.
Specifying plug-in mic type, power, and filter settings.
Adjusting input levels and internal mic response modes.
Choosing optimized mic modes for different recording scenarios.
Fine-tuning input sensitivity and level meters for optimal recording.
Setting sensitivity levels for different input types.
Manually adjusting input levels using knobs to avoid clipping.
Using the AUTO SENS function for automatic level optimization.
How to start, stop, and manage recordings using the REC button.
Adding markers to projects for easy navigation during recording.
Dividing projects into smaller files for easier searching.
Examples and settings for recording various sources like instruments and concerts.
Tips for recording vocals, guitars, and pianos using internal/external mics.
Best practices for recording bands in rehearsal spaces using internal mics.
Techniques for capturing ambient sound or distant sources using mic directionality.
Methods for recording live performances from the stage.
How to select projects, play, rewind, and fast-forward.
Choosing between single, sequential, or shuffle playback order.
Enabling or disabling repeated playback of projects.
Adjusting channel monitoring and volume levels during playback.
Adding and managing markers for efficient project navigation.
Using A-B repeat function to loop specific sections of audio.
Adjusting playback speed without altering pitch for analysis.
Navigating, selecting, and performing operations on projects and folders.
Steps to open, select, and duplicate recorded projects.
Procedures for relocating projects and removing unwanted files/folders.
Changing the names of projects and folders using the on-screen keyboard.
Editing projects by splitting, merging, or removing sections.
Recording short voice memos to label projects for easy recall.
Converting WAV projects into MP3 format for distribution.
Attempting to recover damaged or unplayable recorded projects.
Organizing projects by creating new folders at root or sub-levels.
Choosing between storage, audio interface, or selectable mode.
Copying projects to and from the computer using USB storage mode.
Understanding how projects and files are organized on the SD card.
Safe procedures for disconnecting the R-26 from Windows and Mac OS.
Connecting the R-26 for recording and playback via USB audio software.
Guide for installing necessary drivers for computer connectivity.
Setting the audio interface sampling rate compatible with computer software.
Selecting the audio input source (internal, analog, plug-in) for audio interface mode.
Recording audio to both the R-26 and computer simultaneously.
Enabling monitoring of input audio through headphones/speakers.
Hearing computer audio output via the R-26's monitoring system.
Mixing R-26 input with computer playback for re-recording or streaming.
Configuration for recording mode, source, sample rate, format, and naming.
Settings for playback mode, repeat function, and file order.
Configuring internal, analog, and plug-in mic settings like limiter and filters.
Adjusting display, auto-off, battery type, USB connection, and language.
Configuring sample rate and input device for audio interface mode.
Managing SD card info/format and restoring factory default settings.
Adjusting input sensitivity, mic mode, and automatic sensitivity settings.
Solutions for issues encountered during the recording process.
Solutions for issues encountered during playback.
Solutions for miscellaneous issues like power, connectivity, and display problems.
Details on tracks, signal processing, data types, and memory card compatibility.
Technical details on audio inputs, outputs, levels, impedance, and phantom power.
Information on display, power supply, dimensions, weight, accessories, and options.
To Next Page
