Roland RD-2000 Parameter Guide

Convenient Functions (Utility)
Deleting a Program File (Backup Delete)
Here’s how to delete a previously saved Program le.
1. In the MENU screen, select “Utility” and press the
[ENTER] button.
2. Use the cursor [
H
] [
I
] buttons to select “Backup
Delete,” and then press the [ENTER] button.
3. Use the [DEC] [INC] buttons or the value dial to
select the Program le that you want to delete; then
press the [ENTER] button.
The conrmation message appears.
If you decide to cancel without deleting the Program le, press the
[EXIT] button.
MEMO
If you choose “ALL,” all Program les will be deleted.
4. Press the [MENU] button to delete the Program le.
NOTE
5 Be sure never to turn o the power while the delete is in
progress.
5 Do not disconnect the USB ash drive while the le is being
deleted.
Formatting Memory (Format)
“Formatting” is the operation of deleting all Program les from user
memory or initializing a USB ash drive so that it can be used with
the RD-2000.
USB ash drive cannot be used with the RD-2000 unless it is
formatted suitably for the RD-2000.
Before using a new USB ash drive, you’ll need to format it.
NOTE
When you format the USB ash drive, all data previously
saved on that memory will be erased. Before you carry out a
format, make sure that the USB ash drive does not contain
important data you need to keep.
1. In the MENU screen, select “Utility” and press the
[ENTER] button.
2. Press the cursor [
H
] [
I
] [
K
] [
J
] buttons to select
“Format USB Memory” and then press the [ENTER]
button.
A conrmation message appears.
If you decide to cancel the Format operation, press the [EXIT]
button.
3. Carefully read the conrmation message in the
screen, and then press the [ENTER] button.
4. Press the [MENU] button to execute the Format
operation.
NOTE
5 Never turn o the unit while the screen indicates “Executing...”
5 Never turn o the power or disconnect the USB ash drive
while reading or writing is in progress.
Returning to the Factory Settings
(Factory Reset)
The settings stored in the RD-2000 can be returned to their factory
settings.
1. In the MENU screen, select “Utility” and press the
[ENTER] button.
2. Press the cursor [
H
] [
I
] [
K
] [
J
] buttons to select
“Factory Reset” and then press the [ENTER] button.
A conrmation message appears.
3. Carefully read the conrmation message in the
screen, and then press the [ENTER] button.
4. Press the [MENU] button.
Factory reset is executed.
NOTE
Never turn o the power during Factory Reset (while
“Executing... Don’t Power OFF” appears in the display).
5. Turn the power of the RD-2000 o, then on again.
29

Roland RD-2000 Specifications

General

Pedal jack	Yes
Sound effects	Compression, Equalization, Modulation, Reverberation
Tones quantity	1100
Built-in speaker(s)	No
Number of front panel sliders	9
Reverberation effects quantity	6
Preset programs quantity	300
Keyboard name	PHA-50
Keys quantity	88 keys
Display resolution	256 x 80 pixels
Power consumption (max)	23 W
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Headphone connectivity	6.3 mm
Product color	Black
Cables included	AC

Weight and Dimensions

Depth	367 mm
Width	1412 mm
Height	140 mm
Weight	21700 g