Roland RD-2000 Parameter Guide

50
Modulation FX Parameters
39: MODULATION DELAY
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
When Feedback Mode is CROSS:
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
FEEDBACK,
RATE,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
FEEDBACK,
RATE,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Delay Left
(sync switch)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Delay Left
(msec)/
Delay Left
(note)
1–1300 [msec]
Delay time from the original
sound until the left delay
sound is heard
note (p. 60)
Delay Right
(sync switch)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Delay Right
(msec)/
Delay Right
(note)
1–1300 [msec]
Delay time from the original
sound until the right delay
sound is heard
note (p. 60)
Feedback
Mode
NORMAL, CROSS
Selects the way in which
delay sound is fed back into
the eect (See the gures
above.)
Feedback # -98–+98 [%]
Adjusts the amount of the
delay sound that’s fed back
into the eect. Negative “-”
settings invert the phase.
Parameter Value Explanation
HF Damp
200–8000 [Hz],
BYPASS
Adjusts the frequency above
which sound fed back to
the eect is ltered out
(BYPASS: no cut).
Rate # OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Rate (Hz) #/
Rate (note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Depth 0–127 Depth of modulation
Phase 0–180 [deg] Spatial spread of the sound
Low Gain -15–+15 [dB]
Gain of the low frequency
range
High Gain -15–+15 [dB]
Gain of the high frequency
range
Balance #
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
delay sound (W)
Level 0–127 Output Level
40: 3TAP PAN DELAY
Produces three delay sounds; center, left and right.
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
CENTER
FEEDBACK,
BALANCE,
DELAY LEFT
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
CENTER
FEEDBACK,
BALANCE,
DELAY LEFT
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Delay Left/
Right/Center
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Delay Left/
Right/Center
(msec) #/
Delay Left/
Right/Center
(note) #
1–2600 [msec]
Adjusts the time until the
delay sound is heard.
note (p. 60)

Roland RD-2000 Specifications

General

Pedal jack	Yes
Sound effects	Compression, Equalization, Modulation, Reverberation
Tones quantity	1100
Built-in speaker(s)	No
Number of front panel sliders	9
Reverberation effects quantity	6
Preset programs quantity	300
Keyboard name	PHA-50
Keys quantity	88 keys
Display resolution	256 x 80 pixels
Power consumption (max)	23 W
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Headphone connectivity	6.3 mm
Product color	Black
Cables included	AC

Weight and Dimensions

Depth	367 mm
Width	1412 mm
Height	140 mm
Weight	21700 g