EasyManuals Logo

Roland RD-2000 Parameter Guide

Roland RD-2000
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
58
Modulation FX Parameters
Parameter Value Explanation
Feedback
Knob
OFF,
ENHANCER SENS,
ENHANCER MIX,
CHORUS RATE,
CHORUS
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Enhancer
Sens #
0–127 Sensitivity of the enhancer
Enhancer
Mix #
0–127
Level of the overtones
generated by the enhancer
Chorus Pre
Delay
0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
Chorus Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Chorus Rate
(Hz) #/
Chorus Rate
(note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Chorus Depth 0–127 Depth of modulation
Chorus
Balance #
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the chorus (W)
and the sound that is not
sent through the chorus (D).
Level 0–127 Output Level
58: ENHANCER
0
FLANGER
Feedback
Flanger
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
ENHANCER SENS,
ENHANCER MIX,
FLN RATE,
FLN FEEDBACK,
FLN BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
ENHANCER SENS,
ENHANCER MIX,
FLN RATE,
FLN FEEDBACK,
FLN BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Enhancer
Sens #
0–127 Sensitivity of the enhancer
Enhancer
Mix #
0–127
Level of the overtones
generated by the enhancer
Flanger Pre
Delay
0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
anger sound is heard.
Parameter Value Explanation
Flanger Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Flanger Rate
(Hz) #
Flanger Rate
(note) #
0.05–10.0 [Hz]
Frequency of modulation
note (p. 60)
Flanger
Depth
0–127 Depth of modulation
Flanger
Feedback #
-98–+98 [%]
Adjusts the proportion of the
anger sound that is fed back
into the eect. Negative “-”
settings will invert the phase.
Flanger
Balance #
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the anger (W)
and the sound that is not
sent through the anger (D).
Level 0–127 Output Level
59: ENHANCER
0
DELAY
Feedback
Delay
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
ENHANCER SENS,
ENHANCER MIX,
DELAY FEEDBACK,
DELAY BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
ENHANCER SENS,
ENHANCER MIX,
DELAY FEEDBACK,
DELAY BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Enhancer
Sens #
0–127 Sensitivity of the enhancer
Enhancer
Mix #
0–127
Level of the overtones
generated by the enhancer
Delay Time
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Delay Time
(msec)/
Delay Time
(note)
1–2600 [msec]
Adjusts the delay time from
the direct sound until the
delay sound is heard.
note (p. 60)
Delay
Feedback #
-98–+98 [%]
Adjusts the proportion of the
delay sound that is fed back
into the eect. Negative “-”
settings will invert the phase.

Table of Contents

Other manuals for Roland RD-2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland RD-2000 and is the answer not in the manual?

Roland RD-2000 Specifications

General IconGeneral
Pedal jackYes
Sound effectsCompression, Equalization, Modulation, Reverberation
Tones quantity1100
Built-in speaker(s)No
Number of front panel sliders9
Reverberation effects quantity6
Preset programs quantity300
Keyboard namePHA-50
Keys quantity88 keys
Display resolution256 x 80 pixels
Power consumption (max)23 W
Audio (L/R) out2
Headphone outputs1
USB connector typeUSB Type-A, USB Type-B
Headphone connectivity6.3 mm
Product colorBlack
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth367 mm
Width1412 mm
Height140 mm
Weight21700 g

Related product manuals