Roland RD-2000 Parameter Guide

46
Modulation FX Parameters
Parameter Value Explanation
Pre Delay 0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
anger sound is heard.
Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Rate (Hz) #/
Rate (note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Depth 0–127 Depth of modulation
Phase 0–180 [deg] Spatial spread of the sound
Feedback # -98–+98 [%]
Adjusts the proportion of the
anger sound that is fed back
into the eect. Negative “-”
settings will invert the phase.
Step Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Step Rate
(Hz) #/
Step Rate
(note)#
0.10–20.00 [Hz]
Rate (period) of pitch change
note (p. 60)
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Balance #
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
anger sound (W)
Level 0–127 Output Level
29: HEXA-CHORUS
Uses a six-phase chorus (six layers of chorused sound) to give
richness and spatial spread to the sound.
Balance W
Balance W
L in
R in
L out
R out
Hexa Chorus
Balance D
Balance D
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
RATE,
BALANCE,
DEPTH
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
RATE,
BALANCE,
DEPTH
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Pre Delay 0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Parameter Value Explanation
Rate (Hz) #/
Rate (note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Depth 0–127 Depth of modulation
Pre Delay
Deviation
0–20
Adjusts the dierences in Pre
Delay between each chorus
sound.
Depth
Deviation
-20–+20
Adjusts the dierence in
modulation depth between
each chorus sound.
Pan Deviation 0–20
Adjusts the dierence in
stereo location between each
chorus sound.
0: All chorus sounds will be in
the center.
20: Each chorus sound will be
spaced at 60 degree intervals
relative to the center.
Balance #
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
chorus sound (W)
Level 0–127 Output Level
30: TREMOLO CHORUS
This is a chorus eect with added Tremolo (cyclic modulation of
volume).
Tremolo Chorus
L in
R in
L out
R out
Balance D
Balance D
Balance W
Balance W
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
CHORUS RATE,
TREMOLO RATE,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
CHORUS RATE,
TREMOLO RATE,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Pre Delay 0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
Chorus Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Chorus Rate
(Hz) #/
Chorus Rate
(note) #
0.05–10.00 [Hz]
Modulation frequency of the
chorus eect
note (p. 60)
Chorus Depth 0–127
Modulation depth of the
chorus eect

Roland RD-2000 Specifications

General

Pedal jack	Yes
Sound effects	Compression, Equalization, Modulation, Reverberation
Tones quantity	1100
Built-in speaker(s)	No
Number of front panel sliders	9
Reverberation effects quantity	6
Preset programs quantity	300
Keyboard name	PHA-50
Keys quantity	88 keys
Display resolution	256 x 80 pixels
Power consumption (max)	23 W
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Headphone connectivity	6.3 mm
Product color	Black
Cables included	AC

Weight and Dimensions

Depth	367 mm
Width	1412 mm
Height	140 mm
Weight	21700 g