Roland RD-2000 Parameter Guide

48
Modulation FX Parameters
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
ATTACK,
THRESHOLD,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
ATTACK,
THRESHOLD,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Attack # 0–127
Sets the time it takes until the
level is compressed after the
input exceeds the Threshold.
Threshold # 0–127
Adjusts the volume at which
compression begins
Post Gain 0–+18 [dB] Adjusts the output gain.
Low Gain -15–+15 [dB]
Gain of the low frequency
range
High Gain -15–+15 [dB]
Gain of the high frequency
range
Level # 0–127 Output Level
35: LIMITER
Compresses signals that exceed a specied volume level,
preventing distortion from occurring.
L in
R in
L out
R out
Limiter
2-Band EQ
2-Band EQ
Limiter
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
RELEASE,
THRESHOLD,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
RELEASE,
THRESHOLD,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Release # 0–127
Adjusts the time after the
signal volume falls below
the Threshold Level until
compression is no longer
applied.
Threshold # 0–127
Adjusts the volume at which
compression begins
Ratio
1.5:1, 2:1, 4:1,
100:1
Compression ratio
Post Gain 0–+18 [dB] Adjusts the output gain.
Low Gain -15–+15 [dB]
Gain of the low frequency
range
High Gain -15–+15 [dB]
Gain of the high frequency
range
Parameter Value Explanation
Level # 0–127 Output Level
36: SUSTAINER
This eect compresses high input and boosts low input, making
the volume consistent and producing undistorted sustain.
L in
R in
L out
R out
Sustainer
2-Band EQ
2-Band EQ
Sustainer
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
SUSTAIN,
ATTACK,
RELEASE,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
SUSTAIN,
ATTACK,
RELEASE,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Sustain # 0–127
Adjusts the range of volume
for which low input signals
are boosted to make the
volume consistent.
Higher settings produce
longer sustain.
Attack 0–127
Time until the volume is
compressed
Release 0–127 Time until compression ends
Post Gain -15–+15 [dB] Adjusts the output gain.
Low Gain -15–+15 [dB]
Gain of the low frequency
range
High Gain -15–+15 [dB]
Gain of the high frequency
range
Level # 0–127 Output Level
37: GATE
Cuts the reverb’s delay according to the volume of the sound
sent into the eect. Use this when you want to create an articial-
sounding decrease in the reverb’s decay.
L in
R in
L out
R out
Gate
Gate
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.

Roland RD-2000 Specifications

General

Pedal jack	Yes
Sound effects	Compression, Equalization, Modulation, Reverberation
Tones quantity	1100
Built-in speaker(s)	No
Number of front panel sliders	9
Reverberation effects quantity	6
Preset programs quantity	300
Keyboard name	PHA-50
Keys quantity	88 keys
Display resolution	256 x 80 pixels
Power consumption (max)	23 W
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Headphone connectivity	6.3 mm
Product color	Black
Cables included	AC

Weight and Dimensions

Depth	367 mm
Width	1412 mm
Height	140 mm
Weight	21700 g