Roland RD-2000 - Comp; Cry Wah; Script Phaser; Ss Phaser

37
Modulation FX Parameters
6: SS PHASER
This simulates an analog phaser of the past.
It is particularly suitable for electric piano.
L in
R in
L out
R out
Phaser
2-Band EQ
2-Band EQ
Phaser
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
RATE, COLOR
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF, RATE, COLOR
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Rate # 0–100 Frequency of modulation
Color # 1, 2 Modulation character
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Level 0–127 Output Level
7: SCRIPT PHASER
This simulates a dierent analog phaser than SS PHASER.
It is particularly suitable for electric piano.
L in
R in
L out
R out
Phaser
2-Band EQ
2-Band EQ
Phaser
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
SPEED, DEPTH
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF, SPEED,
DEPTH
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Speed # 0–100 Frequency of modulation
Depth # 0–127 Modulation character
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Level 0–127 Output Level
8: CRY WAH
This models the sound of the CRY BABY wah pedal popular in the
‘70s.
Eect Level
Direct Level
L in
R in
L out
R out
2-Band
EQ
WAH
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
PEDAL POSITION,
EFFECT LEVEL,
DIRECT LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Pedal
Position #
0–100
Adjusts the position of the
wah pedal.
* This parameter can also
be assigned to a pedal etc.
and controlled.
Pedal Min 0–100
Selects the tone produced
when the heel of the EXP
Pedal is depressed.
Pedal Max 0–100
Selects the tone produced
when the toe of the EXP
Pedal is depressed.
Low Gain -15–+15 [dB]
Adjusts the low frequency
range tone.
High Gain -15–+15 [dB]
Adjusts the high frequency
range tone.
Eect Level # 0–127
Adjusts the volume of the
eect sound.
Direct Level # 0–127
Adjusts the volume of the
direct sound.
9: D-COMP
This models a MXR DynaComp.
Compressor Tone
L in
R in
L out
R out
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.