Roland RD-2000 - Importing Text to Display as the Scene Memo (Scene Memo Import); Exporting a Scene as a Program and Saving It (Scene to Program); Deleting a Scene (Scene Remove)

SCENE UTILITY
Importing Text to Display as the Scene
Memo (Scene Memo Import)
The memo displayed for the recalled scene can be imported as a
text le from a USB ash drive.
1. In the MENU screen, select “Scene Utility” and press
the [ENTER] button.
2. Use the cursor [
H
] [
I
] [
K
] [
J
] buttons to select
“Scene import,” and then press the [ENTER] button.
The SCENE MEMO IMPORT screen appears.
Files of the following format can be imported.
Item Explanation
File format Text le (*.txt)
File name
16 single-byte alphanumeric characters (if
greater than 16 characters, only a portion is
shown).
Memo content
32 single-byte alphanumeric characters (the
33rd and subsequent characters are not
imported)
Two lines of up to 16 characters can be shown.
If there is a line-return in the rst line, the text
wraps to the next line, decreasing the number
of characters that can be shown.
Line-returns of CR+LF and LF are supported.
Characters that
can be used
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!”#$%&’()*+,-./:;<=>?@[\]^_’{|}
?
* The last character is a space.
3. Use the value dial to select the text le that you
want to import, and press the [ENTER] button.
The SCENE MEMO EDIT screen appears.
4. Use the cursor [
K
] [
J
] buttons to move the cursor to
the position at which you want to enter a character.
5. Use the [DEC] [INC] buttons or the value dial to enter
the characters.
Operation Explanation
[SHIFT] + [
K
] button
Delete one character (DELETE)
[SHIFT] + [
J
] button
Insert one space (INSERT)
[
H
] [
I
] button
Switch uppercase/lowercase
6. Repeat steps 4–5 to input the memo.
7. Press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
8. Press the [MENU] button.
The memo is saved.
Exporting a Scene as a Program and
Saving It (Scene To Program)
Here’s how to export the currently-recalled scene as a program and
save it.
The rst 16 characters of the memo content are used as the
program name.
NOTE
The memo content cannot be shown in the program.
By re-registering the program as a scene, you’ll be able to
view and edit the memo.
1. In the MENU screen, select “Scene Utility” and press
the [ENTER] button.
2. Use the cursor [
H
] [
I
] [
K
] [
J
] buttons to select
“Scene To Program,” and then press the [ENTER]
button.
The SCENE TO PROGRAM screen appears.
3. Use the value dial to select the save-destination, and
press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4. Press the [MENU] button.
The scene is saved as a program.
Deleting a Scene (Scene Remove)
Here’s how to delete the currently-recalled scene.
1. Select the scene that you want to delete.
2. Press the [MENU] button.
3. Use the cursor [
H
] [
I
] [
K
] [
J
] buttons to select
“Scene Utility” and then press the [ENTER] button.
4. Use the cursor [
H
] [
I
] [
K
] [
J
] buttons to select
“Scene Remove,” and then press the [ENTER] button.
The SCENE REMOVE screen appears.
5. Press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
6. Press the [MENU] button.
The scene is deleted.
31