Roland RD-2000 Parameter Guide

65
Delay Parameters
This is a delay that is applied to the entire Program. You can choose from ve types.
You can also adjust the amount of delay that is applied to each zones by editing the “DLY (Delay Send Level)” (p. 4) from each zones.
Settings common to all Delay types
Parameter Value Explanation
Type
DELAY A stereo delay.
T-CTRL DELAY
A delay that allows you to
smoothly change the delay
time.
DELAY
0
TREMOLO
Tremolo is applied to the
delay sound.
2TAP DELAY
Delayed sound is heard
from two locations that you
specify.
3TAP DELAY
Delayed sound is heard from
three locations that you
specify.
Level 0–127 Delay volume.
1: DELAY
Parameter Value Explanation
Switch OFF, ON Delay on/o
O Mode
IMMEDIATE,
REMAIN
Species what happens
to the delay decays of the
previously-played phrase
when you turn delay o.
IMMEDIATE: The delay
sound disappears
immediately.
REMAIN: The delay sound
decays naturally.
Output Select
MAIN,
REV,
MAIN+REV
Species the output
destination of the sound
from the delay.
Delay
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Delay (msec)/
Delay (note)
1–1300 [msec]
Adjusts the delay time from
the direct sound until the
delay sound is heard.
note (p. 60)
Feedback -98–+98 [%]
Adjusts the amount of the
delay sound that’s fed back
into the eect. Negative “-”
settings invert the phase.
HF Damp
200–8000 [Hz],
BYPASS
Adjusts the frequency above
which sound fed back to
the eect is ltered out
(BYPASS: no cut).
2: T-CTRL DELAY
Parameter Value Explanation
Switch OFF, ON Delay on/o
Parameter Value Explanation
O Mode
IMMEDIATE,
REMAIN
Species what happens
to the delay decays of the
previously-played phrase
when you turn delay o.
IMMEDIATE: The delay
sound disappears
immediately.
REMAIN: The delay sound
decays naturally.
Output Select
MAIN,
REV,
MAIN+REV
Species the output
destination of the sound
from the delay.
Delay
(sync sw)
OFF, ON
If this is on, the delay is
synchronized with the
tempo.
Delay (msec)/
Delay (note)
1–1300 [msec]
Adjusts the delay time from
the direct sound until the
delay sound is heard.
note (p. 60)
Acceleration 0–15
Species the time over
which the current delay
time changes to the newly
specied delay time when
you change the delay time.
This changes the speed of
the pitch change as well as
the delay time.
Feedback -98–+98 [%]
Adjusts the proportion of the
delay sound that is fed back
into the eect. Negative (-)
settings will invert the phase.
HF Damp
200–8000 [Hz],
BYPASS
Adjusts the frequency above
which sound fed back to
the eect is ltered out
(BYPASS: no cut).
3: DELAY “ TREMOLO
Parameter Value Explanation
Switch OFF, ON Delay on/o
O Mode
IMMEDIATE,
REMAIN
Species what happens
to the delay decays of the
previously-played phrase
when you turn delay o.
IMMEDIATE: The delay
sound disappears
immediately.
REMAIN: The delay sound
decays naturally.
Output Select
MAIN,
REV,
MAIN+REV
Species the output
destination of the sound
from the delay.
Input Mode
MONAURAL,
STEREO
MONAURAL: The input is
mixed to mono.
STEREO: The input is stereo.
Delay
(sync sw)
OFF, ON
If this is on, the delay is
synchronized with the
tempo.
Delay (msec)/
Delay (note)
1–1300 [msec]
Adjusts the delay time from
the direct sound until the
delay sound is heard.
note (p. 60)

Roland RD-2000 Specifications

General

Pedal jack	Yes
Sound effects	Compression, Equalization, Modulation, Reverberation
Tones quantity	1100
Built-in speaker(s)	No
Number of front panel sliders	9
Reverberation effects quantity	6
Preset programs quantity	300
Keyboard name	PHA-50
Keys quantity	88 keys
Display resolution	256 x 80 pixels
Power consumption (max)	23 W
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Headphone connectivity	6.3 mm
Product color	Black
Cables included	AC

Weight and Dimensions

Depth	367 mm
Width	1412 mm
Height	140 mm
Weight	21700 g