Roland RD-2000 Parameter Guide

55
Modulation FX Parameters
49: OD
0
CHORUS
L in
R in
Chorus
Overdrive
L out
R out
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
OVERDRIVE DRIVE,
OVERDRIVE PAN,
CHORUS RATE,
CHORUS
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
OVERDRIVE DRIVE,
OVERDRIVE PAN,
CHORUS RATE,
CHORUS
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Overdrive
Drive #
0–127
Degree of distortion
Also changes the volume.
Overdrive
Pan #
L64–63R
Stereo location of the
overdrive sound
Chorus Pre
Delay
0.0–100.0 [msec]
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
Chorus Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Chorus Rate
(Hz) #/
Chorus Rate
(note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Chorus Depth 0–127 Depth of modulation
Chorus
Balance #
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the chorus (W)
and the sound that is not
sent through the chorus (D).
Level 0–127 Output Level
50: OD
0
FLANGER
L in
R in
Flanger
Overdrive
L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Parameter Value Explanation
Depth Knob
OVERDRIVE DRIVE,
OVERDRIVE PAN,
FLN RATE,
FLN FEEDBACK,
FLN BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
OVERDRIVE DRIVE,
OVERDRIVE PAN,
FLN RATE,
FLN FEEDBACK,
FLN BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Overdrive
Drive #
0–127
Degree of distortion
Also changes the volume.
Overdrive
Pan #
L64–63R
Stereo location of the
overdrive sound
Flanger Pre
Delay
0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
anger sound is heard.
Flanger Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Flanger Rate
(Hz) #/
Flanger Rate
(note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Flanger
Depth
0–127 Depth of modulation
Flanger
Feedback #
-98–+98 [%]
Adjusts the proportion of the
anger sound that is fed back
into the eect. Negative “-”
settings will invert the phase.
Flanger
Balance #
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the anger (W)
and the sound that is not
sent through the anger (D).
Level 0–127 Output Level
51: OD
0
DELAY
L in
R in
Delay
Overdrive
L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
OVERDRIVE DRIVE,
OVERDRIVE PAN,
DELAY FEEDBACK,
DELAY BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.

Roland RD-2000 Specifications

General

Pedal jack	Yes
Sound effects	Compression, Equalization, Modulation, Reverberation
Tones quantity	1100
Built-in speaker(s)	No
Number of front panel sliders	9
Reverberation effects quantity	6
Preset programs quantity	300
Keyboard name	PHA-50
Keys quantity	88 keys
Display resolution	256 x 80 pixels
Power consumption (max)	23 W
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Headphone connectivity	6.3 mm
Product color	Black
Cables included	AC

Weight and Dimensions

Depth	367 mm
Width	1412 mm
Height	140 mm
Weight	21700 g