Roland RD-2000 - Equalizer; Scream; Spectrum

38
Modulation FX Parameters
Parameter Value Explanation
Depth Knob
SENS, RELEASE,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Sens # 0–100
This controls the input
sensitivity.
Release # 0–100 Adjusts the release time.
Tone -50–+50 Adjusts the tone.
Level # 0–127 Output Level
10: T-SCREAM
This models the analog overdrive of the past.
It adds a nice amount of overtones without dirtying the sound.
L in
R in
L out
R out
Overdrive
Tone
Tone
Overdrive
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
DISTORTION,
TONE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
DISTORTION,
TONE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Distortion # 0–127
Degree of distortion
Also changes the volume.
Tone # 0–127
Sound quality of the
Overdrive eect
Level 0–127 Output Level
11: EQUALIZER
This is a four-band stereo equalizer (low, mid x 2, high).
L in
R in
L out
R out
4-Band EQ
4-Band EQ
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Parameter Value Explanation
Depth Knob
LOW GAIN,
HIGH GAIN,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
LOW GAIN,
HIGH GAIN,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Low Freq 20–400 [Hz] Frequency of the low range
Low Gain # -15–+15 [dB] Gain of the low range
Mid1 Freq 200–8000 [Hz]
Frequency of the middle
range 1
Mid1 Gain -15–+15 [dB] Gain of the middle range 1
Mid1 Q
0.5, 1.0, 2.0, 4.0,
8.0
Width of the middle range 1
Set a higher value to narrow
the range to be aected.
Mid2 Freq 200–8000 [Hz]
Frequency of the middle
range 2
Mid2 Gain -15–+15 [dB] Gain of the middle range 2
Mid2 Q
0.5, 1.0, 2.0, 4.0,
8.0
Width of the middle range 2
Set a higher value to narrow
the range to be aected.
High Freq 2000–16000 [Hz] Frequency of the high range
High Gain # -15–+15 [dB] Gain of the high range
Level # 0–127 Output Level
12: SPECTRUM
This is a stereo spectrum. Spectrum is a type of lter which modies
the timbre by boosting or cutting the level at specic frequencies.
L in
R in
L out
R out
Spectrum
Spectrum
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
BAND1,
BAND3,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
BAND1,
BAND3,
LEVEL
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.