59
Modulation FX Parameters –
Parameter Value Explanation
Delay HF
Damp
200–8000 [Hz],
BYPASS
Adjusts the frequency
above which sound fed
back to the eect will be cut
(BYPASS: no cut).
Delay
Balance #
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not
sent through the delay (D).
Level 0–127 Output Level
60: CHORUS
0
DELAY
Feedback
Delay
L in
Balance W
Balance W
Balance D
Chorus
Balance W
Balance W
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
CHORUS RATE,
CHORUS
BALANCE,
DELAY FEEDBACK,
DELAY BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
CHORUS RATE,
CHORUS
BALANCE,
DELAY FEEDBACK,
DELAY BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Chorus Pre
Delay
0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
Chorus Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Chorus Rate
(Hz) #/
Chorus Rate
(note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Chorus Depth 0–127 Depth of modulation
Chorus
Balance #
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
chorus sound (W)
Delay Time
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Delay Time
(msec)/
Delay Time
(note)
1–2600 [msec]
Adjusts the delay time from
the direct sound until the
delay sound is heard.
note (p. 60)
Parameter Value Explanation
Delay
Feedback #
-98–+98 [%]
Adjusts the proportion of the
delay sound that is fed back
into the eect. Negative “-”
settings will invert the phase.
Delay HF
Damp
200–8000 [Hz],
BYPASS
Adjusts the frequency
above which sound fed
back to the eect will be cut
(BYPASS: no cut).
Delay
Balance #
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not
sent through the delay (D).
Level 0–127 Output Level
61: FLANGER
0
DELAY
Feedback
Delay
Balance W
Balance W
Balance D
Flanger
Balance W
Balance W
Balance D
Feedback
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
FLN RATE,
FLN FEEDBACK,
FLN BALANCE,
DELAY FEEDBACK,
DELAY BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
FLN RATE,
FLN FEEDBACK,
FLN BALANCE,
DELAY FEEDBACK,
DELAY BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Flanger Pre
Delay
0.0–100 [msec]
Adjusts the delay time from
the direct sound until the
anger sound is heard.
Flanger Rate
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Flanger Rate
(Hz) #/
Flanger Rate
(note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
Flanger
Depth
0–127 Depth of modulation
Flanger
Feedback #
-98–+98 [%]
Adjusts the proportion of the
anger sound that is fed back
into the eect. Negative “-”
settings will invert the phase.
Flanger
Balance #
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
anger sound (W)