Roland RD-2000 Parameter Guide

54
Modulation FX Parameters
Parameter Value Explanation
Depth Knob
COARSE,
FINE,
FEEDBACK,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
COARSE,
FINE,
FEEDBACK,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Coarse #1 -24–+12 [semi]
Adjusts the pitch of the pitch
shifted sound in semitone
steps.
Fine #1 -100–+100 [cent]
Adjusts the pitch of the pitch
shifted sound in 2-cent steps.
Delay Time
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Delay Time
(msec)/
Delay Time
(note)
1–1300 [msec]
Adjusts the delay time from
the direct sound until the
pitch shifted sound is heard.
note (p. 60)
Feedback # -98–+98 [%]
Adjusts the proportion of the
pitch shifted sound that is fed
back into the eect. Negative
“-” settings will invert the
phase.
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Balance #
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
pitch shifted sound (W)
Level 0–127 Output Level
48: 2VOICE PITCH SHIFTER
Shifts the pitch of the original sound. This 2-voice pitch shifter has
two pitch shifters, and can add two pitch shifted sounds to the
original sound.
L i
n
R i
n
L out
R ou
t
Level 1
Balance W
Balance D
Balance W
Balance D
Level 2
Pan 2 R
Pan 1 L
Pan 1 R
Pan 2 L
2Voice
Pitch Shifter
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Parameter Value Explanation
Depth Knob
PITCH1 COARSE,
PITCH1 FINE,
PITCH1
FEEDBACK,
PITCH1 PAN,
PITCH2 COARSE,
PITCH2 FINE,
PITCH2
FEEDBACK,
PITCH2 PAN,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF,
PITCH1 COARSE,
PITCH1 FINE,
PITCH1
FEEDBACK,
PITCH1 PAN,
PITCH2 COARSE,
PITCH2 FINE,
PITCH2
FEEDBACK,
PITCH2 PAN,
BALANCE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Pitch1 Coarse
#1
-24–+12 semi
Adjusts the pitch of Pitch
Shift 1 in semitone steps.
Pitch1 Fine #1 -100–+100 cent
Adjusts the pitch of Pitch
Shift Pitch 1 in 2-cent steps.
Pitch1 Delay
(sync sw)
OFF, ON
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner’s
manual: p. 24).
Pitch1 Delay
(msec)/
Pitch1 Delay
(note)
1–1300 [msec]
Adjusts the delay time from
the direct sound until the
Pitch Shift 1 sound is heard.
note (p. 60)
Pitch1
Feedback #
-98–+98 [%]
Adjusts the proportion of the
pitch shifted sound that is fed
back into the eect. Negative
“-” settings will invert the
phase.
Pitch1 Pan # L64–63R
Stereo location of the Pitch
Shift 1 sound
Pitch1 Level 0–127
Volume of the Pitch Shift 1
sound
Pitch2 Coarse
#2
-24–+12 semi
Settings of the Pitch Shift 2
sound.
The parameters are the same
as for the Pitch Shift 1 sound.
Pitch2 Fine #2 -100–+100 cent
Pitch2 Delay OFF, ON
Pitch2 Delay
(msec)/
Pitch2 Delay
(note)
1–1300 [msec]
note (p. 60)
Pitch2
Feedback #
-98–+98 [%]
Pitch2 Pan # L64–63R
Pitch2 Level 0–127
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Balance #
D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
pitch shifted sound (W)
Level 0–127 Output Level

Roland RD-2000 Specifications

General

Pedal jack	Yes
Sound effects	Compression, Equalization, Modulation, Reverberation
Tones quantity	1100
Built-in speaker(s)	No
Number of front panel sliders	9
Reverberation effects quantity	6
Preset programs quantity	300
Keyboard name	PHA-50
Keys quantity	88 keys
Display resolution	256 x 80 pixels
Power consumption (max)	23 W
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Headphone connectivity	6.3 mm
Product color	Black
Cables included	AC

Weight and Dimensions

Depth	367 mm
Width	1412 mm
Height	140 mm
Weight	21700 g