Roland RD-2000 - Default Chapter; Sdd-320

35
Modulation FX Parameters
Settings common to all Modulation FX
Parameter Value Explanation
Type
Refer to the eect
list (p. 34).
Species the type of
Modulation FX.
The editable parameters will
depend on the eect type
that’s selected.
Routing
MOD FX
0
TR/
AMP
,
TR/AMP
0
MOD
FX
Lets you select the routing of
the Modulation FX and the
Tremolo/Amp Simulator.
By switching the Routing
type, you can change the
eect that’s applied to the
sound.
For example, suppose that
you chose Chorus as the
MOD FX and chose E. PIANO
for TR/AMP; with the MOD
FX
0
TR/AMP setting, the
chorus sound will be output
in mono, but with the TR/
AMP
0
MOD FX setting it
will be output in stereo.
1: CE-1
This models the classic BOSS CE-1 chorus eect unit. It provides a
chorus sound with a distinctively analog warmth.
L in
R in
L out
R out
CE-1
2-Band EQ
2-Band EQ
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
INTENSITY, LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF, INTENSITY,
Level
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Intensity # 0–127 Chorus depth
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Level # 0–127 Output Level
2: SDD-320
This models Roland’s DIMENSION D (SDD-320). It provides a clear
chorus sound.
L in
R in
L out
R out
SDD-320
2-Band EQ
2-Band EQ
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
LEVEL, MODE
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF, LEVEL, MODE
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Mode #
1, 2, 3, 4, 1+4, 2+4,
3+4
Switches the mode.
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Level # 0–127 Output Level
3: RE-201
A virtual tape echo that produces a realistic tape delay sound. This
simulates the tape echo section of a Roland RE-201 Space Echo.
Echo Level
Echo Level
L in
R in
L out
R out
Tape Echo
Direct Level
Direct Level
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
REPEAT RATE,
INTENSITY,
ECHO LEVEL,
DIRECT LEVEL
Species the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Rate Knob
Species the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Feedback
Knob
OFF, REPEAT RATE,
INTENSITY,
ECHO LEVEL,
DIRECT LEVEL
Species the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Mode
S, M, L, S+M, S+L,
M+L, S+M+L
Combination of playback
heads to use
Select from three dierent
heads with dierent delay
times.
S: short
M: middle
L: long
Repeat Rate # 0–127
Tape speed
Increasing this value will
shorten the spacing of the
delayed sounds.
Intensity # 0–127 Amount of delay repeats
Bass -15–+15 [dB]
Boost/cut for the lower range
of the echo sound