Roland RM-700 - Setting Markers for Repeated Practice (Marker); Placing a Marker Within a Song

118
Using the Practice Functions
By setting markers at points in a song that you want to practice repeatedly, you can then easily go to and repeat play back of the
selected measures.
You can place two separate markers (Marker A and Marker B) in one song. These markers are placed at the beginning of a measure.
Placing markers is a handy way to start playback at the same place as many times as you like. You can add markers or move to a
marker even while playback is in progress.
1.
Select the song in which you’ll set the markers (p. 75).
2.
Press the [Menu] button so its indicator is lit.
3.
Touch <Settings>.
* The Menu screen for Settings contains five screen pages. Touch
to switch between the pages.
4.
Touch <Marker>.
The Marker screen appears.
You can also access the Marker screen by touching <Marker> in the “Count” screen (p. 115).
Placing Markers
5.
Go to the measure where you want to set a marker using the [
(Prev)] and [ (Next)] buttons.
The measure number shown in the upper part of the screen will change.
6.
Touch <- - -> for Marker A.
Marker A is placed at the beginning of the measure you selected.
“- - -” on the screen will change to the number of the measure where you placed the marker.
7.
In the same way, touch the Marker B <- - -> to set Marker B.
Marker B is placed.
* It is not possible to assign marker B to the same location or a measure before marker A.
Setting Markers for Repeated Practice (Marker)
Placing a Marker within a Song
RM-700_e.book 118 ページ ２００９年３月１８日 水曜日 午前１１時５分