Rosemount 8712C - Page 58

Model 8712C/U/H Magnetic Flowmeter Transmitters
5-8
5. Disconnect the cable at the LOI Connector as shown in
Figure 5-2.
The power supply transformer may be left in the unit unless it is
suspected to be faulty.
FIGURE 5-2. Model 8712C/U Captive Screws and Connectors
FIGURE 5-3. Model 8712C/U Electronics Board Connection Ports
LOI Connector
Power Connector
Terminal Block
Connector
Terminal Block
Connector
Power Supply Transformer
Captive Screws
8712-015AB, 010AB
8712-014AB
Power Connector
Terminal Block
Connector
LOI
Connector
Terminal Block
Connector