Sam4s ER-5200 - Program 150 - PLU Group Assignment

94 • Program Mode Programming ER-5200/40/15
Program 150 - PLU Group Assignment
Each PLU may report to any three levels of groups. Group totals appear on reports, so that you can
track sales of different types of items. A group can also be used to designate items that are to print on
an optional kitchen printer.
Note: The PLU will report to group "0", if not programmed to report to groups 1-20.
1. Turn the control lock to the P position.
2. To begin the program, enter 1 5 0, press the SBTL key.
0 SBTL
5 1
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive
the same setting; press the PLU key. Enter the last number in the range;
press the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Enter up to three 2-dig it numbers representing the groups where you wish to
add the PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four.
Press the X/TIME key.
X/TIME
2
nd
Group
3
st
Group
1
rd
Group
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalise the program.
CASH