Sam4s ER-5200 - Open Code Entry PLU; Preset Price Code Entry PLU

ER-5200/40/15 Operating Instructions • 33
Open Code Entry PLU
If the PRESET status of a PLU is set to N (no), the PLU will operate as an open PLU. See
"PLU Programming" in the "Program Mode Programming" chapter to program PLU
descriptors and options.
1. Enter the PLU number; press the PLU
key. For example, enter:
2 PLU
2. The display will prompt "ENTER
PRICE". Enter an amount on the ten
keypad. Do not use the decimal key.
For example, for £2.99, enter:
2 9 9
3. Press the PLU key again.
PLU
THANK-YOU
CALL AGAIN
DATE 01/15/2003 WED TIME
08:33
PLU2 T1
£2.99
TAX1
£0.18
TOTAL
£3.17
CASH
£3.17
CLERK 1 No.000011
00001
Preset Price Code Entry PLU
1. Enter the PLU number; press the PLU
key. For example, enter:
1 PLU
THANK-YOU
CALL AGAIN
DATE 01/15/2003 WED TIME
08:33
PLU1
£1.29
TOTAL
£1.29
CASH
£1.29
CLERK 1 No.000011
00001