ER-5200/40/15 Program Mode Programming • 173
NLU Code Number Programming
NLU are fixed keys on the keyboard (like traditional department keys) that access specific PLUs.
On the default keyboard, there are 117 NLU keys and the PLU# assigned to the NLU key is the same, i.e.
NLU key number one is PLU #1. However, with this program, you can assign any PLU number you wish
to any one of the 117 possible NLU keys.
Programming the NLU Code Number
1. Turn the control lock to the P position.
2. To begin the program, enter 1 0 0 0, press the SBTL key.
0 SBTL 0 0 1
3. Type the new PLU code number you wish to use for this NLU key, and Press
the NLU key on the keyboard you wish to program, and Press the NLU key
again.
NLU Code
To Next Page
Loading...
