Sam4s ER-5200 - MACRO Schedule Programming

180 • Program Mode Programming ER-5200/40/15
MACRO Schedule Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 2000, press the SBTL key.
0 SBTL
0 0
2
3. Press the MACRO key you want to program.
MACRO
4. Enter the scheduled time value, press the X/TIME key. If 10:35, enter 1035
and press X/TIME.
5 X/TIME
3 0 1
5. Repeat steps 3 – 4 if you want to program more macro schedules. Default
scheduled macro count is 5.
6. Press the CASH key to finalise the program
CASH