160 • Program Mode Programming ER-5200/40/15
Group Programming
Group totals are available to accumulate totals of individual PLUs that are assigned to each group. Each PLU
can be assigned to one, two or three different groups.
• Use program 900 to assign a group status, i.e. a group can be set to not add to
the total of all groups, or a group can be used to designate like items for kitchen
printer assignment.
• Use program 910 to assign a unique descriptor for each group, so that the group
may be easily understood on the group report.
Programming Group Status - Program 900
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0 0, press the SBTL key.
0 SBTL09
3. Enter the number of the group you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SBTL key.
Address OPTION VALUE = SUM
Group total is added to the total of all
group on the Group report?
Yes = 0
No = 1
N1
Send to kitchen printer? Yes = 2
No = 0
No Choice 0
KP PORT# : R(print a kitchen requisition) 1
KP PORT# : 1 2
N2
KP PORT# : 2 4
N3
Print RED on KP? Yes = 1
No = 0
N2
To Next Page
Loading...
