Sam4s ER-5200 - Program 450 - PLU MIX & MATCH Programming

ER-5200/40/15 Program Mode Programming • 103
Program 450 - PLU MIX & MATCH Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 4 5 0, press the SBTL key.
0 SBTL
5 4
3. Select the PLU you wish to be linked to the mix & match table:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU to be linked, then the PLU key, and the last PLU in the
range, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in the range, and press the PLU key,
then enter the last PLU number in the range and press the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Enter the number of the Mix & Match Table then press the X/TIME key.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalise the program.
CASH