Sam4s ER-5200 - Cheque Change Limit Programming

ER-5200/40/15 Program Mode Programming • 175
Cheque Change Limit Programming
Use this program to set the maximum amount of cash that can be returned when a cheque is tendered
for an amount greater than the amount of the sale. For example, if the cheque change limit is £10.00 the
maximum amount that can be tendered into the cheque key on a £5.00 sale is £15.00.
Programming the Cheque Change Limit
1. Turn the control lock to the
P
position.
2. To begin the program, enter 1 2 0 0, press the SBTL key.
0 SBTL 0 2 1
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME
key.
X/TIME
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalise the program.
CASH