Sam4s ER-5200 - CURRENCY CONVERSION - Function Key Programs

128 • Program Mode Programming ER-5200/40/15
CURRENCY CONVERSION - Function Key Programs
Currency Conversion Rate - Program 90
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0, press the SBTL key.
0 SBTL9
3. Enter the exchange rate of up to 7 digits (do not enter the decimal point), then
enter a number from 0 to 7 to indicate the decimal position. See "Currency
Exchange Rate Programming Examples" below.
Exchange Rate
Decimal
Position
4. Press the function key on the keyboard you wish to program.
FUNCTION
KEY
5. To program additional function keys, repeat from step 2, or press the CASH
key to finalise the program.
CASH
Currency Exchange Rate Programming Examples
Note: Foreign currency exchange rates may be stated as “foreign currency in euros ”. Use
the rate stated in “Sterling in foreign currency” when you are programming this section.
The £1.00 is worth 63 Euros (foreign currency).
4
3
7
2
Exchange Rate
Decimal
Position
1
0