Sam4s ER-5200 - PLU Stock Programming by ADD; DEDUCT; OVERWRITE KEY

98 • Program Mode Programming ER-5200/40/15
PLU Stock Programming By ADD / DEDUCT / OVERWRITE KEY
There are three keys to program stock. ADD, DEDUCT,OVERWRITE.
1.Turn the control lock to the P position.
2.To begin the program, Press ADD STOCK, DEDUCT STOCK, OVERWRITE
STOCK, Keys on the Keyboard Location.
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and Press the last
PLU keys, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU
key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME key.
X/TIME
Stock Amount
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalise the
program.
CASH