Sam4s ER-5200 - Cancel; Void Position Operations

48 • Operating Instructions ER-5200/40/15
Cancel
The CANCEL key allows you to stop any transaction. Anything registered within the
transaction before the CANCEL key is pressed is automatically corrected. The CANCEL
key can be inactivated through programming, see "Function Key Programming" in the
"Program Mode Programming" chapter, or the key can be programmed to require manager
control.
1. Register the items you wish to sell.
2. Press the CANCEL key
CANCEL
THANK-YOU
CALL AGAIN
DATE 01/15/2003 WED TIME
08:33
PLU1 T1
£2.29
PLU2 -
0.50
CANCEL
*************************
CLERK 1 No.000011
00001
Void Position Operations
You can use the VOID control lock position to correct any complete transaction. To correct
any transaction:
1. Turn the control lock to the VOID
position.
2. Enter the transaction you wish to correct
exactly as it was entered originally in the
REG control lock position. You can
enter discounts, voids, returns, tax
exemptions or any other function.
3. All totals and counters are corrected as if
the original transaction did not take place.
THANK-YOU
CALL AGAIN
DATE 01/15/2003 WED TIME
08:33
VOID MODE
**********************
PLU1 T1 -
2.29
PLU2 -
1.00
TAX1 AMT -
0.14
TOTAL -
3.43
CASH -
3.43
CLERK 1 No.000011
00001