ER-5200/40/15 Service Mode Programming • 79
Initial Clear
1.Turn the control lock to the P position.
2.Turn the power switch to the OFF position .
3.Press and hold the CASH key. While continuing to hold the CASH key, turn the
power switch to the ON position.
PC Online Mode
In ER-52XX series, There are no special commands to enter PC Online Mode.
When you want to enter PC Online mode, All you have to do is to set 232 Communication Option in Programming.
When PC sends commands to the ECR, the ECR will be automatically in Online Mode if connected.
To Next Page
Loading...
