Sam4s ER-5200 - Program 280 - PLU Minimum Stock Amount Programming

ER-5200/40/15 Program Mode Programming • 99
Program 280 - PLU Minimum Stock Amount Programming
Turn the control lock to the P position.
1. To begin the program, enter 2 8 0, press the SBTL key.
0 SBTL
8 2
2. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and press the
last PLU keys, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive
the same setting; press the PLU key. Enter the last number in the range;
press the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
3. Enter the stock amount you wish to add (up to 4 digits), press the X/TIME key.
X/TIME
Stock Amount
4. To program additional PLUs, repeat from step 3, or press the CASH key to
finalise the program.
.
CASH