Sam4s ER-5200 - CHECK # - Function Key Programs

ER-5200/40/15 Program Mode Programming • 127
CHECK # - Function Key Programs
Options - Program 70
CHECK#
CASH
Repeat for another
function key
N1
SBTL 0 7 N2
N3
N4
Address OPTION VALUE = SUM
Key is inactive? Yes = 1
No = 0
Before registering, begin a tracking number? Yes = 2
No = 0
N1
Opening clerk has exclusive access? Yes = 4
No = 0
Check track # and balance will print on receipt? Yes = 0
No = 1
Check track # and balance will print on remote? Yes = 0
No = 2
N2
Allow only one check per table? Yes = 4
No = 0
Check# is automatically assigned by register? Yes = 1
No = 0
N3
PBAL key is used Drive thru recall key? Yes = 2
No = 0
N4
Length of Check(0-9) 0-9
Descriptor
- Refer to “Program 80 – Function Key Descriptor”