Sam4s ER-5200 User Manual

162 • Program Mode Programming ER-5200/40/15
Miscellaneous Programming
Macro Key Sequence Programming
Macros are special function keys that are used to execute a sequence of key depressions. For example,
a macro might be used to execute a string of reports or to automatically tender a preset amount. Up to
ten different macros may be placed on the keyboard. (See "Function Key Assignment Programming”
to place macros on the keyboard.)
To Program a Macro
1. Turn the control lock to the P position.
2. To begin the program, enter 1 5 0 0, press the SBTL key.
0 SBTL
0 5 1
3. Press the Macro key that you wish to program.
MACRO
4. First, you must change the Mode Key. Default Mode is PGM Mode.
Therefore, If you want to start in REG Mode, you must change Mode key to
REG Mode. Type up to 50 key stokes
Type up to 50 key strokes
5. Turn the control lock to the P position. Press the same Macro key to end the
sequence
MACRO
6. Repeat from step 3 - 5 to program additional macros. Press the CASH key to
finalise the program.
CASH
To remove a Macro
If you wish to remove a key stroke from a macro, replace the current function with
the INACTIVE function.

Sam4s ER-5200 Specifications

General

Brand	Sam4s
Model	ER-5200
Category	Cash Register
Language	English