Sam4s ER-5200 - Program 801 - Drawer Assignment & Training Clerk

ER-5200/40/15 Program Mode Programming • 155
Program 801 - Drawer Assignment & Training Clerk
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0 1, press the SBTL key.
1 SBTL08
3. Enter the number (1-15) of the clerk you wish to program; press the X/TIME
key.
X/TIME
4. Enter an option digit from the table below, press the SBTL key.
Address OPTION VALUE = SUM
N1
Drawer assignment (0:
default drawer, 1: second drawer, 2: no
drawer)
0-2
N2
Training Clerk
Yes=1
No=0
N2
SBTL
N1
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key
to finalise the program.
CASH