Sam4s ER-5200 - Date and Time Programming

176 • Program Mode Programming ER-5200/40/15
Date and Time Programming
Use this program to set the clock and calendar on your ER5200/5240/5215. The date changes
automatically. After initial setting, time changing will probably be required only for beginning and
ending daylight savings time.
Programming the Date and Time
1. Turn the control lock to the
P
position.
2. To begin the program, enter 1 3 0 0, press the SBTL key.
0 SBTL
0 3 1
3. Enter time in military standard time (based on 24 hours), must be four digits (i.e.
1300 hours = 1:00 PM); press the X/TIME key.
H H X/TIMEM M
4. Enter the date in MM(month) DD(day) and YY(year) format. Press the
X/TIME key:
M
M
D
D
X/TIME
Y Y
5. Press the CASH key to finalise the program.
CASH