Sam4s ER-5200 - System Configuration and Defaults

ER-5200/40/15 Service Mode Programming • 77
Clear PLU File
1.Turn the control lock to the S position.
2.To Reset PLU file, enter 40, press the SBTL key.
0 SBTL
4
3. Press the /TIME key to confirm.
X/TIME
4. Press the CASH key to finalise
CASH
Eprom Information
1.Turn the control lock to the S position.
2.To Scan Eprom Information, enter 50, press the SBTL key.
0 SBTL
5
Memory Allocation Information
1.Turn the control lock to the S position.
2.To Scan Eprom Information, enter 60, press the SBTL key.
0 SBTL 6
Load Default Keyboard
1.Turn the control lock to the S position.
2.Turn the power switch to the OFF position .