Samsung R40plus - Page 87

86
7
Click Add Printer and set up a printer following the
instructionsinthewizard.Oncetheprinteradditionis
complete,clickRefresh.
Select a printer and click Complete.
Ifyoudon’twanttoaddaprinter,justclickComplete
withoutfollowingtheinstructionsinthewizard.
8
If the “Do you want to move to the added location
now?”windowappears,clickNo.
Iftheiconfortheaddedlocationappear,itmeans
thattheclientcongurationiscomplete.
If you click Yes,thecomputerconnectstothe
sharing server and you can immediately use the
Internet.
To connect to the Internet from the
Sharing Client
1
 Checkifthesharingserverturnsonbecausethis
is mandatory. If you connect to the sharing server
throughawirelessLAN,thewirelessLANofthe
servermustbeturnedon.
2
Run Samsung Network Manager on the sharing
client computer.
3
 Clicktheiconforthelocationthathasbeensetas
the sharing client in the Shared Location window and
click Go.
Once a message appears to inform you that moving
iscomplete,youcanusetheInternet.IftheInternet
isdisconnectedduringuse,clickWireless menus
> Reconnect Sharing in Samsung Network
Manager.Then,thenetworkwillbeconnected
again.