Samsung R40plus - Page 86

85
6
 Setupthedevicetobeconnectedtotheclientas
showninthegurebelowandclickNext.
Because the wireless connection name and network
keyenteredinthesharingservermustbeenteredinthe
clientaswell,rememberthem.
7
Check the settings and click Next.
8
Click Add Printer and set up a printer following the
instructionsinthewizard.
Onceprinteradditioniscomplete,clickRefresh.
Select the added printer and click Complete.
Ifyoudon’twanttoaddaprinter,justclickComplete
withoutfollowingtheinstructionsinthewizard.
9
If the “Do you want to move to newly added
location now?”windowappears,clickNo.
The added location icon is created and sharing
server setup is complete. Set up the sharing client
next.
How to Set up the Sharing Client
Thisdescriptionisdiscussedbasedonthewireless
connection to the sharing server. The sharing server has
tobeturnedonandthewirelessLANsinbothcomputers
havetobeactive.
1
Run Samsung Network Manager on a computer
that will function as the sharing client.
2
Click Add.
3
Select the icon that shows the network location and
enter the location name. Click Next.
4
Select Sharing Client (Wireless) and click Next.
5
Enter the values in the Wireless Connection Name
and Network KeyeldsintheSelectDevicewindow
and click Next.
6
Check the settings and click Next.