Confidential
Chapter 1 Before Installation
RFV01U-D2A Installation Manual v2.0 9
Copyright © 2017, All Rights Reserved.
No. Name Specification Purpose of use
10 Level
Normal For horizontality and verticality.
11 Hammer Drill
Normal Wall type drilling.
12 Concrete Drill Bit
0.55 in. (14 mm) For the M10 strong Anchor.
13 Anchor Punch
M10 For the M10 strong Anchor.
14 Hammer
Normal Anchor fixing.
15 Vacuum Cleaner
Normal
For removing dust during the drilling
work.
16 Heating Gun
122 to 572°F (50 °C to
300 °C)
Shrinking feeder cable tube.
17 Cable Cutter
0.24 to 1.26 in. (6 to 32 mm) Cable cutting.
18 Crimping Tool
AWG14 to AWG4 (1.5 to 16
mm
2
)
Pressure terminal for crimping.
19 Wire Stripper
Apply cable thickness: 1.5 to
6.2 in.(4 to 16 mm)
Cable sheath for removal.
20 Nipper
Basic Tool For cutting cable.
21 LAN Tool
Basic Tool RJ45 crimper.
22 Industrial Scissor
Basic Tool Cutting.
23 Knife
Basic Tool Cutting.
24 Optical Connector Cleaner For LC Connector For optical connector cleaning.
To Next Page
Loading...