User manual
SANTEC IP cameras
_________________________________________________________________________________
- 113 -
Note on e-mail:
Make sure the SMTP configuration has been completed.
Also refer to chapter “2.3.4.1 Mail Server” for further details.
• Send HTTP notification:
Check this item to determine the HTTP address and to specify the parameters for
event notifications in case of a triggered alarm. When an alarm is triggered, the
notification is sent to the specified HTTP server.
• Example:
If the custom parameter is set as ”action=1&group=2” and the HTTP server name is
”http://192.168.1.10/alarm.php”, the notification will be sent to HTTP server as
”http://192.168.1.10/alarm.php?action=1&group=2” when an alarm is triggered.
File name:
The uploaded image’s file name format can be set in this section. Please select the one that
meets your requirements.
• Add date/time suffix:
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence number
• Add sequence number suffix:
File name: imageXXXXXXX.jpg
X: Sequence number
• Overwrite:
The original image in the FTP site will be overwritten by the newly uploaded file with a
static file name.
Save:
After you have completed all the settings mentioned above, please click on the <Save>
button to save all the settings in this page.
To Next Page
Loading...
