Part I: Camera connections, cabling, technical specifications
1. General
1.1 Included items
All camera models:
1x IP camera
1x CD (IP finder and user manual)
1x Quick installation guide
Additionally for SNC-3302, SNC-3303 and SNC-3305:
1x Allen wrench for flange back adjustment
Additionally for SNC-5312IR, SNC-5315IR and SNC-5323IR:
1x Wall/ceiling bracket and sun shield
1x Cable adapter BNC socket/plug
1x Adapter power plug (open cable ends)
1x Torx wrench
4x Screws
Additionally for SNC-6202 and SNC-6212IR:
1x Power cable with terminal block (for 12 V DC / 24 V AC power)
1x Rubber gasket
2x Self-tapping screws
2x Plastic screw anchors
Additionally for SNC-4302IR, SNC-6302, SNC-6312IRH, SNC-6315IRH and SNC-6323IRH:
1x Power cable with terminal block
1x Torx wrench
4x Self-tapping screws
4x Plastic screw anchors
1x Large black washer
1x Membrane plug
2x White stickers
For outdoor installations, it is recommended to use the cable gland.
Cable gland components:
1x White washer (a)
1x Cable gland (b) with lid (e)
1x Black cable grommet (suitable for 1-2 cables) (c)
1x Red stopper (for grommet) (d)
To Next Page
Loading...