Santec SNC-3302 - Snc-8322 Ho, Snc-8322 I

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 35 -
SNC-8322I, SNC-8322HO:
On the camera you will find the following connectors:
SNC-8322I: SNC-8322HO:
A
RJ-45 connector
B
Alarm I/O
C
Power
D
Micro SD card slot
E
Reset to factory default:
• Keep camera connected to power.
• Use a pointed device to press onto the
reset button and hold it for approx. 1 sec.
• Release the button and wait approx. 1 sec.
• Press and hold the reset button for approx.
30 sec.
• The camera is now restored to factory
default settings.
F
Audio I/O