2.5 Camera (not for SNC-8322I and SNC-8322HO)
2.5.1 Profile
The profile setting can be found under this path: Camera -> Profile
1. Select a profile number:
• Normal: Standard
• 1-10: Per selected profile, you can define an individual name
2. If required, enable the box “by schedule” and select a schedule (at least one schedule
has to be defined; see chapter 2.3.8). The profile setting also works without setting a
schedule.
3. Confirm by ticking the box.
If you have set a profile 1-10, all following camera settings will refer to these profiles, i.e.
exposure, white balance, image adjustment, backlight, digital zoom, IR light, WED and noise
reduction.
To Next Page
Loading...
