User manual
SANTEC IP cameras
_________________________________________________________________________________
- 83 -
2.3 System
This page is only available to the administrator.
2.3.1 System
The system setting can be found under the path: System > System
Host name:
Enter a host name here for camera identification (max. 36 characters). If the motion detection
function is enabled and is set to send alarm message by mail/FTP, the host name entered
here will display in the alarm message.
This information is also used for identification of the IP Finder (display, name).
Time zone:
Select your time zone from the drop-down menu.
To Next Page
Loading...
