Santec SNC-3302 - Basic; Network

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 92 -
2.3.3 Network
2.3.3.1 Basic
The basic settings can be found under this path: System > Network > Basic
Users can choose to connect to the IP camera with fixed or dynamic (DHCP) IP addresses.
The IP camera also provides PPPoE support for users who connect to the network via PPP
over Ethernet (PPPoE
).
General:
 Get IP address automatically (DHCP):
The camera’s default IP address is 192.168.1.168.
If you select <Get IP address automatically> after the IP camera has been
connected, you can use the SANTEC IP Finder (included in the supplied CD) to
generate an IP address.