Santec SNC-3302 - Page 72

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 72 -
Camera
SNC-6202
SNC-6212IR
RS-485 interface
No
Alarm management HTTP, FTP, SMTP
Schedule
Yes
Management software support NUUO, Genetec and others
Security features
HTTPS, IP Filter, IEEE 802.1X
Supported protocols UPnP, Bonjour, DHCP, FTP, HTTP, SMTP, RTSP
Supported software standards
ONVIF
Internal memory Micro SD card (optional)
Video Content Analytics (VCA)
No
Ethernet connector RJ-45
Ethernet standards
10Base-T / 100Base-TX
Classification IP-44
Vandal-proof
Yes, IK10
Heater & fan No
Camera mounting
Screw mount
Housing colour White
Housing material
Plastic
Integrated IR LEDs No
Wave length: 850 nm
Illuminants: 24 LEDs
Range: Max. 20 m*
Voltage 12 V DC, 24 V AC, PoE
PoE standard
IEEE 802.3af
Power consumption 6 watt
4.5 watt without IR-LEDs
8 watt with IR-LEDs
Operting temperature
-20° to +50° C
Storage temperature -20° to +60° C
Relative humidity
10-90% non-condensing
Dimensions (D x H) 149 x 100 mm
Weight
Approx. 550 g
Certification CE, RoHS
Items included in the delivery
Quick installation guide, CD (IP-Finder, user manual),
power cable with terminal block, rubber gasket, screws/anchors
Supported languages German, English
* Note:
The range of the built-in IR-LEDs depends on the location and the surroundings. Strongly
absorbent surfaces, e.g. dark, rough structures (floor, lawn or asphalt), may lead to a
considerable reduction of the maximum range.
Subject to technical changes without notice. Errors excepted.