SATEL VERSA 53
– troubles,
– arming/disarming,
– some other system related events (e.g. start and end of service mode, clock
programming, end of remote programming, etc.).
Fig. 17. Programming the monitoring parameters and options in the DLOADX program (an
example of configuration).
9.1 Reporting parameters and options
Reporting options
– Station 1 or 2 – event code will be sent to the station to which the control panel will be
able to connect.
– Station 1 – all event codes will be sent to Station 1.
– Station 2 – all event codes will be sent to Station 2.
– Station 1 and 2 – all event codes will be sent to both monitoring stations.
– Events amount limiting – events from the same source are saved into the event log
and reported to the monitoring station 3 times only. This option does not apply to the
To Next Page
Loading...
