Satel Versa - Page 26

24 User Manual SATEL
– press any keyfob button – reception of the transmission by the module which supports
the 433 MHz keyfobs will be acknowledged by two short beeps. Press the keyfob key
again – two short beeps will confirm reception of the second transmission by the
module which supports the 433 MHz keyfobs. In the LCD keypad, suitable messages
will be displayed, suggesting the user what to do.
Note: For numeration of buttons in the 433 MHz keyfobs please refer to section OPERATING
THE
ALARM SYSTEM BY MEANS OF KEYFOB (p. 45).
8. Step 5c. Assigning function to 433 MHz keyfob button 1. You can accept the function
provided for by the user schedule, or you can enter a number corresponding to one of the
functions below (see: ENTERING DIGITS) and press the key:
0. Not used
1. Zone 1 violation
2. Zone 2 violation
3. Zone 3 violation
4. Zone 4 violation
5. Zone 5 violation
6. Zone 6 violation
7. Zone 7 violation
8. Zone 8 violation
9. Zone 9 violation
10. Zone 10 violation
11. Zone 11 violation
12. Zone 12 violation
13. Zone 13 violation
14. Zone 14 violation
15. Zone 15 violation
16. Zone 16 violation
17. Zone 17 violation
18. Zone 18 violation
19. Zone 19 violation
20. Zone 20 violation
21. Zone 21 violation
22. Zone 22 violation
23. Zone 23 violation
24. Zone 24 violation
25. Zone 25 violation
26. Zone 26 violation
27. Zone 27 violation
28. Zone 28 violation
29. Zone 29 violation
30. Zone 30 violation
31. Arming partition 1 – full armed mode
32. Arming partition 1 – night armed mode
33. Arming partition 1 – day armed mode
34. Disarming / clearing alarm in partition 1
35. Arming partition 2 – full armed mode
36. Arming partition 2 – night armed mode
37. Arming partition 2 – day armed mode
38. Disarming / clearing alarm in partition 2