satmap active10 - 5.00 SETTINGS MENU Page; Next; Default; Map

© Satmap Systems Ltd
© Satmap Systems Ltd
16
5.00 SETTINGS MENU Page
(GPS Map → MAIN MENU → SETTINGS)
The SETTINGS MENU page gives you access
to a wide range of settings options. Of these
the most signicant are Power Control and
Backlight. It is recommended that all users
acquaint themselves with these two options
pages in order to maximise battery life.
At any point, should you wish to exit a settings
page, either press Map (front left button) to go
to the GPS Map screen, or press Back (front
right button).
The full list of settings options are:
• Power Control
• Advanced Power Control
• 2 Data Box Layout
• 4 Data Box Layout (upper)
• 4 Data Box Layout (lower)
• GPS Settings
• Memory Status
• Units and Set Speed
• Compass Settings
• Calibrate Compass
• Set Trip Data
• Volume Control
• Buttons Control
• Screen Data Options
• Time Offset
• Languages
• About
Buttons:
Next
Either press Next or scroll through options
using joystick to highlight settings options
Default
Go to Default Settings page
Choose Yes to go to the Default Options
page;
• Choose Clear All to reset all the user
dened settings, trail and GPS data to the
factory set defaults. The unit will then turn
itself off.
• Choose Reset Settings to reset only the
settings data to the factory set defaults.
Choose No to retain all current settings and
return to the SETTINGS MENU.
Map
Return to last map screen
Select
Either press Select or centre press the
joystick to select the highlighted option
Cancel
Return to MAIN MENU
Back
Return to MAIN MENU
5.00 SETTINGS MENU
Figure 5.00