27
5.12 Set Trip Data
5.12 Set Trip Data
(GPS Map → MAIN MENU → Settings → Set
Trip Data)
Showing Inactive Routes
• Use the joystick, moving left/right to toggle
between;
Show Inactive Routes: Inactive routes are
shown on maps.
Hide Inactive Routes: Inactive routes are
hidden on maps.
• Press Done or centre press the joystick to
return to SETTINGS MENU.
Auto Clear Trail Data
• Use the joystick, moving left/right to toggle
between;
On: Trail data is cleared when a new route
is selected.
Off: Trail data is not cleared on new route
selection.
• Press Done or centre press the joystick to
return to SETTINGS MENU.
Auto Reset Log
• Use the joystick, moving left/right to toggle
between;
Keep Log on New Route: Log will not be
cleared when starting a new route.
Clear Log on New Route: Log will be
cleared on starting a new route.
• Press Done or centre press the joystick to
return to SETTINGS MENU
Pressing the Default button restores the
following settings:
Showing Inactive Routes
Show Inactive Routes
Auto Clear Trail Data
On
Auto Reset Log
Keep Log on New Route
Figure 5.12
To Next Page
Loading...
