SATO s86ex - Page 158

4 Operation and Configuration
156
S84-ex/S86-ex Operator Manual
CALENDAR MONTH CODE
Set the month code for the calendar.
The setting range is from A to Z and a to z.
The default value is A-JANUARY, B-FEBRUARY, C-MARCH, D-APRIL,
E
-MAY, F-JUNE, G-JULY, H-AUGUST, J-SEPTEMBER, K-OCTOBER,
L-NOVEMBER, M-DECEMBER.
Select the month using the
/ buttons, select the month code using
the
/ buttons, then press the ENTER button to confirm the month
code.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CALENDAR CASE FORMAT
Select the character format for the calendar.
• MIXED: Use upper case for the first character only.
• UPPER: Use upper case for all characters.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CALENDAR CHECK
Enable or disable the calendar check function.
• ENABLE: Enable the calendar check function.
• DISABLE: Disable the calendar check function.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CHARACTER PITCH
Set the character width for printing.
• PROPORTIONAL: Print each character with a different width.
• FIXED: Print all characters with the same width.