SATO s86ex - Memory Mode; Advanced Mode

8 Appendix
295
S84-ex/S86-ex Operator Manual
8.1.4 Memory Mode
8.1.5 Advanced Mode
TRAP SET
USER NAME Null No No
AUTH PROTOCOL NONE No No
AUTH KEY Null No No
PRIVACY PROTOCOL NONE No No
PRIVACY KEY Null No No
IPv4/6 select IPv4 No No
TRAP IPv4 ADR 000.000.000.000 No No
TRAP IPv6 ADR 0000:0000:0000:0000:
0000:0000:0000:0000
No No
Setting Item Initial Value
Default
(User)
Default
(Shipping)
SLOT SETTING NO Yes Yes
CARD SLOT SELECT SLOT0 RAM Yes Yes
CARD SLOT SELECT SLOT1 FROM Yes Yes
CARD SLOT SELECT SLOT2 SD Yes Yes
MEMORY MODE MEMORY SIZE - -
STORED CONTENTS FORM OVERLAY - -
MEMORY FORMAT NO - -
FORMAT START NO - -
Setting Item Initial Value
Default
(User)
Default
(Shipping)
PRINTER TYPE DISPENSER Yes Yes
BACKFEED MOTION BEFORE Yes Yes
PRINT METHOD TRANSFER (Set to DIRECT with direct
thermal model)
Yes Yes
PITCH SENSOR ENABLE (When CONTINUOUS is
selected)
Yes Yes
SENSOR TYPE GAP Yes Yes
COMMAND ERROR DISABLE Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)